Drafting Etiquette
Maintain consistent wheel gap of 30–50 cm. Signal before leaving the front of a rotation. Pull duration: 60–90 seconds on flat segments, shorter on climbs.
GROUP_RULES // 02A
Standard Formation Protocols
All participants agree to follow these protocols during organized joint rides to maintain group cohesion and road safety.
Hand Signal Definitions
Left arm extended: turning or passing obstacle. Right arm extended: stopping. Pointing down: road hazard. Palm facing rear: slowing.
Spacing Requirements
Minimum 2-bike length between groups when splitting on climbs. Reassembly at designated rest zones only — no ad-hoc stops on narrow segments.
Communication Protocol
Verbal calls for obstacles: "hole," "gravel," "car up," "car back." Lead rider responsible for route navigation and advance warnings.
GEAR_REQ // 03B
Mandatory Equipment Prerequisites
All riders must carry the following before joining any peloton departure:
- Helmet (correctly fitted, undamaged)
- Two water bottles or equivalent hydration capacity (minimum 1.5L total)
- Spare inner tube, tire levers, and pump or CO2 inflator
- Front and rear lights for low-visibility conditions
- Tire clearance: 28mm minimum for asphalt routes, 38mm for gravel classes
PACE_ALIGN // 04C
Pace & Peloton Velocity Alignment Tool
Enter your route parameters and bike configuration to receive an estimated completion time and suggested group alignment.
PREP_COMPLETE // 05D
Preparation Checklist Complete?
Once you have reviewed group rules, verified your gear, and identified your pace alignment, browse the ride roster to register for an upcoming departure.
View peloton roster